USD
EUR
CNY
110V/220V
50A 24V 1200W, for 300-600W diode stack/hand piece
LDD-50-24 &PFC 100-240V is 50% more expensive than LDD-50-24 200-240V, the factory owner self says LDD-50-24 is OK
The unique difference is that with &PFC the ps can be used in all countries of 110V and 220V. If you are willing to pay 50% more, we can sell it to you.
前期50A的激光器主要规格是500W，标称50A/20V，我们的电源实际输出指标是50A/24V，可以满足50A/600W以下全部激光器，后来就把标称指标改成了“50A/24V”
808激光电源功率是向下兼容的，请放心使用。
LDD-50-20 接口DB13和6P两种都可以指定或只有6P?这款只有6P的因为没有位置
this power supply is for 50A diode laser(1-12bar,macro channel and micro channel),
24V is the max voltage,It does not mean that it always outputs 24V,the voltage will change automatically according to the number of bar
50A 24V 1200W, for 300-600W diode stack/hand piece
|
Model |
LDD-50-24 | 300mm*156mm*65mm | |
|
Output
|
Output current |
50A |
|
|
Maximum output voltage |
24V | ||
|
Current range |
0A-50A Load: ≤50% | ||
|
voltage range |
≤20V | ||
|
Current accuracy |
±2% | ||
|
Current rise time |
≤3ms | ||
|
Current fall time |
≤2ms | ||
|
Input |
voltage range |
220VAC±10% | |
|
Frequency Range |
47~63Hz | ||
|
Input peak current |
20A@220VAC Load:50A-24V | ||
|
Start pulse current |
15A@220VAC | ||
|
effectiveness |
>80% | ||
|
Protection
|
Overvoltage |
24.5V-25V | |
|
|
Protection mode: turn off the output and resume after restart | ||
|
Overcurrent |
55A-60A | ||
|
|
Protection mode: turn off the output and resume after restart | ||
|
Over temperature |
65℃±5℃ | ||
|
|
Protection mode: turn off the output, and automatically recover after the temperature drops | ||
|
Environment |
Operating temperatur |
Normal temperature | |
|
|
Working humidity |
20-90% non-condensing | |
|
|
Storage temperature, humidity |
-40~85℃,10~95%RH | |
| Pin # | Pin Name | Function description |
| P1 | —Enable | Enable, active low |
| P2, P3 | —NC | |
| P4 | —GND/VREF(-) | Current reference ground |
| P5, P6 | —NC | |
| P7 | —VREF(+) | Current reference (0-4.5V) |
| P8 | —Pulse | Working pulse, high level effective |
| P9, P11, P15 | —12V(-) | Auxiliary power output negative |
| 910, P12 | —NC, | |
| 913, P14 | —12V(+) | Auxiliary power source output positive (DC12V @ 200mA) |
LDD-50-24 &PFC 100-240V is 50% more expensive than LDD-50-24 200-240V, the factory owner self says LDD-50-24 is OK
The unique difference is that with &PFC the ps can be used in all countries of 110V and 220V. If you are willing to pay 50% more, we can sell it to you.
前期50A的激光器主要规格是500W，标称50A/20V，我们的电源实际输出指标是50A/24V，可以满足50A/600W以下全部激光器，后来就把标称指标改成了“50A/24V”
808激光电源功率是向下兼容的，请放心使用。
LDD-50-20 接口DB13和6P两种都可以指定或只有6P?这款只有6P的因为没有位置
this power supply is for 50A diode laser(1-12bar,macro channel and micro channel),
24V is the max voltage,It does not mean that it always outputs 24V,the voltage will change automatically according to the number of bar
You May Like
-
$720.00
-
$15.00
-
$510.00
-
$450.00
