Model |
LDD-50-24 | 300mm*156mm*65mm | |
Output
|
Output current |
50A |
|
Maximum output voltage |
24V | ||
Current range |
0A-50A Load: ≤50% | ||
voltage range |
≤20V | ||
Current accuracy |
±2% | ||
Current rise time |
≤3ms | ||
Current fall time |
≤2ms | ||
Input |
voltage range |
220VAC±10% | |
Frequency Range |
47~63Hz | ||
Input peak current |
20A@220VAC Load:50A-24V | ||
Start pulse current |
15A@220VAC | ||
effectiveness |
>80% | ||
Protection
|
Overvoltage |
24.5V-25V | |
|
Protection mode: turn off the output and resume after restart | ||
Overcurrent |
55A-60A | ||
|
Protection mode: turn off the output and resume after restart | ||
Over temperature |
65℃±5℃ | ||
|
Protection mode: turn off the output, and automatically recover after the temperature drops | ||
Environment |
Operating temperatur |
Normal temperature | |
|
Working humidity |
20-90% non-condensing | |
|
Storage temperature, humidity |
-40~85℃,10~95%RH |
Pin # | Pin Name | Function description |
P1 | —Enable | Enable, active low |
P2, P3 | —NC | |
P4 | —GND/VREF(-) | Current reference ground |
P5, P6 | —NC | |
P7 | —VREF(+) | Current reference (0-4.5V) |
P8 | —Pulse | Working pulse, high level effective |
P9, P11, P15 | —12V(-) | Auxiliary power output negative |
910, P12 | —NC, | |
913, P14 | —12V(+) | Auxiliary power source output positive (DC12V @ 200mA) |
LDD-50-24 &PFC 100-240V is 50% more expensive than LDD-50-24 200-240V, the factory owner self says LDD-50-24 is OK
The unique difference is that with &PFC the ps can be used in all countries of 110V and 220V. If you are willing to pay 50% more, we can sell it to you.
前期50A的激光器主要规格是500W,标称50A/20V,我们的电源实际输出指标是50A/24V,可以满足50A/600W以下全部激光器,后来就把标称指标改成了“50A/24V”
808激光电源功率是向下兼容的,请放心使用。
LDD-50-20 接口DB13和6P两种都可以指定或只有6P?这款只有6P的因为没有位置
this power supply is for 50A diode laser(1-12bar,macro channel and micro channel),
24V is the max voltage,It does not mean that it always outputs 24V,the voltage will change automatically according to the number of bar